REMOTES: 2-5 Button remotes 1-Green Button 1 Blue
Button Board # J-406 T504C
REMOTE OPERATION:
Lock- Press and release to lock doors. Press and
hold to activate “car find”/”panic”
Unlock- Press and release to unlock doors.
Start- Press and release to start vehicle.
Trunk- Press and hold for 2 seconds to activate
2nd channel output.
Light- Press and hold to illuminate LED for use as
an emergency flashlight
CODING REMOTES: Turn the ignition "ON",
Press and release the valet button 5 times. The
parking lights and LED will illuminate and the
horn will chirp one time to indicate the unit is
in programming mode. Press the Start button on
each remote to be coded. (One at a time.)
TACH LEARNING PROCEDURE. Unit is set up for
voltage sensing straight out of the box. To change
to tach, turn ignition on then off press the and
release the valet button 5 times the led will
illuminate, press and release the valet button
1more time, one honk/flash. Press and release the
unlock button, two honks/flashes. Wait for the one
honk/flash indicating you changed the feature.
Turn ignition on then off press and release brake
five times, start the vehicle with the key. The
unit will respond with 1 horn /flash to confirm
entry into tach learning mode, let engine run
until the unit responds with 2 horn/flashes then
one horn ending learning mode. Turn off engine.
Tach is now programmed.
NOTES
1. Extra relay onboard, configurable for Ignition,
Accessory or Starter.
2. Improved Tach Learning procedure.
3. Improved diesel operation.
4. Audible Output
5. OEM style lock and unlock confirmation. You can
configure the Comfort Start to honk the horn on 1
press of the remote or 2 presses of the remote or
not at all.
6. New ergonomic style remote.
7. Remote has a built in flashlight.
8. New and improved window mounted antenna.
9. Valet button and LED are now built into antenna
unit.
10. Added a factory alarm arm wire that sends out
a negative pulse after the remote start shuts down
to rearm a factory alarm.
11. Selectable parking light output. Can be set to
(+) or (-)
